Customize your Tubular Skylight with one or more of our innnovative accessories...
Adds an electric light fixture into your tubular skylight for night time use. The light fixture is installed directly into the lower portion of the light pipe and is wired to a wall switch. Available in 2 different models: single bulb and dual bulb.
The dimmer kit is a short section of light pipe that houses a rotating disc used to block out the incoming light using the included remote control. It's fully assembled and easy to install.
Capable of exhausting 125 cfm, perfect for bathrooms and laundry rooms to help remove moisture buildup. Includes a hidden intake vent in a sleek trim ring. Connected to a remote motor making it extremely quiet. Flexible exhaust tubing allows for many venting options. Can also accommodate a light kit.
Used on installations where a straight run of light pipe is not possible. The 12 foot section is fully adjustable from 0 - 45 degrees allowing you to skew the direction of the light pipe to avoid attic obstructions. Other common applications include steep pitched roofs or cathedral roof installations.
Available for tall attic installations in either 12" or 24" lengths. Below is a chart listing the maximum length of light pipe recommended for each tubular skylight model:
10" model = 18 feet
13" model = 20 feet
18" model = 20 feet
21" model = 20 feet
Most tile roof installations must be installed using a flashing skirt installed over the tubular skylight flashing to ensure a weather-tight installation. For some high profile S-tile roof installations, a turret extension is also needed.